Para Fine-Chem Industries

Shuttering Oil, A Mould Release Formulation applied on Aluminium, Steel & Wood formworks used in Construction, Concrete Products, Pavers, Hume Pipes Etc.,
The milky white color Shuttering Oil is a water based formulation, has a very good spreading and release property. It provides lubricity to the formwork, ensuring easy release of the concrete poured over the formwork. The finishing of the concrete surface is smooth, with no blowholes, crevices and almost gives a plaster-like finish. Being water based, the oil is non-flammable and safe to use in construction sites and industrial processes. It is also environmentally friendly and Biodegradable. This Product is tested in reputed Laboratories like BARC and Civil Aid. It gives a coverage of 300-400 sq.ft. depending on the surface texture of the formwork.
Our Mould Release oil, is NOT reprocessed out of waste engine/lubricating oils, which usually leaves black stains and causes fouling of the formwork.
The product is highly cost effective and costs less than 10 paisa per sqft of formwork.

AREA OF USE
As a sprayable/brushable release agent for smooth
non-absorbent formwork, absorbent formwork,
heated formwork (up to 70°C) and textured formwork.
For concrete roofing slabs as a release agent
For railway sleeper mould release
For Hume pipe and electric pole mould release

FEATURES / ADVANTAGES
High quality surface finish
Extremely low cost per sqft of mould formwork
Excellent smooth finish with no blowholes
Excellent ‘sticking’ ability on vertical mould surfaces
Self-levelling after spray application
Non-combustible vapour
Reduced ‘dusty’ residues on the formwork
Safe for the operators to handle
Easy and precise separation of the formwork from the hardened concrete
Protection of formwork from steel corrosion and early aging

COVERAGE
Roughly 400 sq.ft. per litre of solution, if sprayed uniformly on the formwork.
Coverage also depends on porosity and surface of the formwork. It can vary based on temperature and environmental conditions

SUGGESTED DILUTION
Ready to use solution

USAGE INSTRUCTIONS
Clean the formwork of any dust, concrete residues, stones etc.
Ensure the formwork has a smooth finish
Mix the Mould Release emulsion well and apply over the formwork uniformly with a sponge, brush or roller
Ensure uniform and thorough coverage
Allow to dry for few hours before pouring of concrete
Remove the mould only after the concrete has cured completely

SAFETY PRECAUTIONS
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-MRE-001

Granite polishing cleaner contains abrasives and chemicals that react with the granite surface to create a deep shine and bring out the natural color and beauty. It can even remove rust stains and scratches developed from long storage time.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-GRC--001

A highly effective cleaner designed for everyday maintenance of tiles and natural stones. Ideally suitable as a general purpose cleaner. Designed specialy for removal of limescale & other stains on tiles. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, hotels etc.,


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-TCL-001

Marble cleaner is special formulation for maintenance and regular mopping. Gives floor an extra fine polishing effect and ensures no scratch giving particles are left behind before buffing. A pH balance formulation retains high gloss on marble.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-MCL--001

Shuttering Oil, A Mould Release Formulation applied on Aluminium, Steel & Wood formworks used in Construction, Concrete Products, Pavers, Hume Pipes Etc.,
The Gold color Shuttering Oil, has a very good spreading and release property. It provides lubricity to the formwork, ensuring easy release of the concrete poured over the formwork. The finishing of the concrete surface is smooth, with no blowholes, crevices and almost gives a plaster-like finish. Having a high flash point, the oil is safe to use in construction sites and industrial processes. This Product is tested in reputed Laboratories like BARC and Civil Aid. It gives a coverage of 300-400 sq.ft. depending on the surface texture of the formwork.
Our Mould Release oil, is NOT reprocessed out of waste engine/lubricating oils, which usually leaves black stains and causes fouling of the formwork.

AREA OF USE

As a sprayable/brushable release agent for smooth
non-absorbent formwork, absorbent formwork,
heated formwork (up to 70°C) and textured formwork.
For concrete roofing slabs as a release agent
For railway sleeper mould release
For Hume pipe and electric pole mould release

FEATURES / ADVANTAGES
High quality surface finish
Excellent smooth finish with no blowholes
Excellent ‘sticking’ ability on vertical mould surfaces
Self-levelling after spray application
Non-combustible vapour
Reduced ‘dusty’ residues on the formwork
Safe for the operators to handle
Easy and precise separation of the formwork from the hardened concrete
Protection of formwork from steel corrosion and early aging

COVERAGE
Roughly 400 sq.ft. per litre of oil, if sprayed uniformly on the formwork.
Coverage also depends on porosity and surface of the formwork. It can vary based on temperature and environmental conditons

SUGGESTED DILUTION
Ready to use solution
USAGE INSTRUCTIONS
Clean the formwork of any dust, concrete residues, stones etc.
Ensure the formwork has a smooth finish
Mix the Mould Release oil well and apply over the formwork uniformly with a sponge, brush or roller
Ensure uniform and thorough coverage
Allow to dry for few hours before pouring of concrete
Remove the mould only after the concrete has cured completely

SAFETY PRECAUTIONS
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-MRO-001

Granite polishing cleaner contains abrasives and chemicals that react with the granite surface to create a deep shine and bring out the natural color and beauty. It can even remove rust stains and scratches developed from long storage time.

Additional Information:

• Item Code: PF-MGP--01

Para Fine Concrete Remover is a fast-acting, non-fuming concrete remover for dissolving lime, concrete and mortar residues from concrete mixers, trucks, trowels used in laying and transporting concrete. It can also be used on surfaces that have been splashed with concrete. Concrete Remover quickly loosens the concrete droppings without damaging the metal or floor surface. It can also be safely used on painted surfaces. 

Additional Information:

• Item Code: PF-SCH-CON-001

Nanotechnology based Non-Stick Coating. This high-performance non-stick coating is a Two-part system. Both the Bottom Coat and Top Coat must be applied for the product to be effective. It is applicable on variety of surfaces like steel, aluminum, other metals, plastic, leather, fabric, wood, concrete.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-CAS-001