Para Fine-Chem Industries

Xylene is primarily used as a solvent in the printing, rubber, and leather industries. Along with other solvents, xylene is also widely used as a cleaning agent, a thinner for paint, and in varnishes.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-XYL-001

Liquid trichloroethylene evaporates quickly into the air. It is nonflammable and has a sweet odor. The two major uses of trichloroethylene are as a solvent to remove grease from metal parts and as a solvent to dissolve other substances, such as glues and paints.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-TCE-001

Acetone is an excellent cleaner. It is used in paints, plastics and with other solvents. Owing to its Low surface tension, it removes all types of residues, oxides, oils and contaminants. It quickly evaporates and leaves no residue.

Do not use with energized equipment. As with any chemical product used, material compatibility must be determined on a non-critical area, prior to use.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-ACE-01

Monoethylene Glycol - MEG Price List


Get Best price of 99% pure 25 Litre Drum of Mono Ethylene Glycol CAS No. 107-21-1, C2H6O2. For Certificate of Analysis (COA) & MSDS, kindly contact us.

A primary use of MEG is in the manufacture of polyster and PET resins, films and fibres. In addition, MEG is important in the production of antifreezes, coolants, aircraft anti-icer and deicers and solvents.


Applications:

• Polyester resins (fibers,containers and films)
• Resin esters as plasticizers (adhesives, lacquers and enamels)
• Alkyd-type resins (synthetic rubbers, adhesives,surface coatings)
• Stabilizer against gel formation
• Freezing Point Depression
• Deicing fluids
• Heat transfer fluids (gas compressors, heating, ventilating, air conditioning, process chillers, ice rinks)
• All-weather automotive
• antifreeze and coolants
• Water-based formulations (adhesives, latex paints, asphalt emulsions)

Hazards:

• Hazardous in case of ingestion. 
• Slightly hazardous in case of skin contact (irritant, permeator), of eye contact (irritant), of inhalation. 
• Severe over-exposure can result in death.
• Highly toxic & combustible

**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-MEG-001

Toluene has numerous commercial and industrial applications and is used as a solvent in paints, lacquers, thinners, glues, correction fluid, nail polish remover, and is used in the printing and leather tanning processes.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-TOL-001

Isopropyl Alcohol Price List

(*GST & transportations charges to be applied)

Get Best price of >99% pure 25 litres drum of Isopropyl Alcohol CAS No. 63-67-0, C3H8O. For Certificate of Analysis (COA) & MSDS, kindly contact us.

Uses:

• Used as paint thinners
• Used for cleaning printed circuit boards
• Used for making perfumes
• Pharmaceutical applications
• lacquer formulations, dye solutions, antifreezes, soaps, window cleaners
• Used for making sanitizers
• Major component in household cleaners

Isopropyl alcohol (IUPAC name propan-2-ol; also called isopropyl, isopropanol, or 2-propanol) is a colorless, flammable chemical compound (chemical formula CH3CHOHCH3) with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether.

Isopropyl alcohol, particularly in solutions between 60% and 90% alcohol with 10 – 40% purified water, is rapidly antimicrobial against bacteria, fungi, and viruses. Once alcohol concentrations drop below 50%, usefulness for disinfection drops sharply. Notably, higher concentrations of alcohol don’t generate more desirable bactericidal, virucidal, or fungicidal properties. Alcohol-based versions typically contain some combination of isopropyl alcohol, ethanol (ethyl alcohol), or n-propanol, with versions containing 60% to 95% alcohol the most effective. Care should be taken as they are flammable. Alcohol-based hand sanitizer works against a wide variety of microorganisms but not spores. Compounds such as glycerol may be added to prevent drying of the skin. Some versions contain fragrances; however, these are discouraged due to the risk of allergic reactions. Non-alcohol based versions typically contain benzalkonium chloride or triclosan; but are less effective than alcohol-based ones.
Isopropyl alcohol is effective against viruses such as FCV at 40% – 60% concentrations. Ethanol however, is more effective at 70% – 90% concentrations against FCV. In other cases, isopropyl alcohol is more effective than ethanol at lower percentage concentrations.

Methods of Manufacturing:
Indirect hydration process is based on a two-step reaction of propylene and sulfuric acid; in the first step, mixed sulfate esters, primarily isopropyl hydrogen sulfate, but also diisopropyl sulfate, form; these are then hydrolyzed, forming isopropanol and sulfuric acid.

Health Hazards:
Vapors cause mild irritation of eyes and upper respiratory tract; high concentrations may be anesthetic. Liquid irritates eyes and may cause injury; harmless to skin; if ingested causes drunkenness and vomiting.

Fire Hazards:
Highly flammable. Vapour/air mixtures are explosive. Risk of explosion on contact with strong oxidants. 

First Aid:
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician.

Additional Information:

• Item Code: PF-SOL-IPA-001

Methyl Ethyl Ketone is an organic compound with the formula C4H8O, CAS No. 78-93-3. This colorless liquid ketone has a sharp, sweet odor reminiscent of butterscotch and acetone. It is soluble in water and is commonly used as an industrial solvent.
**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-MEK-001

Ethyl Acetate is a colorless liquid with a faint and pleasant fruity odor. It is miscible in all proportions with the common organic solvents. It is used in glues, nail polish removers, decaffeinating tea and coffee, and cigarettes.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-EAC-001

N-Butanol Price List


(*GST & transportations charges to be applied)

Get Best price of >99% pure 50 litres drum of N-Butanol CAS No. 71-36-3, C4H10O. For Certificate of Analysis (COA) & MSDS, kindly contact us.

N-Butanol is a clear, colorless liquid that is flammable. It has a characteristics banana-like odor. Butan-1-ol is a primary alcohol that is butane in which a hydrogen of one of the methyl groups is substituted by a hydroxy group. It it produced in small amounts in humans by the gut microbes. It has a role as a protic solvent, a human metabolite and a mouse metabolite. It is a primary alcohol and an alkyl alcohol.

Uses:
It is used to make other chemicals, as a solvent, or as an ingredient in formulated products such as cosmetics.
n-Butyl alcohol is used as a solvent in surface coatings. These can include varnishes, resins, waxes and gums. It is also used in the manufacture of other butyl compounds. n-Butyl alcohol is a product of fermentation.

Hazards:

• Flammable liquid and vapor
• May cause drowsiness or dizziness
• Causes narcotic effects
• Causes skin irritation

**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-NBT-001

Butyl Cellosolve is a very versatile solvent product with a good balance of many different properties. With a nearly equal balance of hydrophobic and hydrophilic character, butyl cellosolve glycol ether provides excellent performance in coatings, cleaners and many other types of products.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-BCS-001

Ethyl Cellosolve is a solvent used widely in commercial and industrial application. It is a clear, colorless, nearly odorless liquid that is miscible with water, ethanol, diethyl ether, acetone and ethyl acetate.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-ECS-001

Butyl Acetate a clear liquid with a fruity odors used in cosmetics and personal care products. It is also used in the formulation of nail polish, nail polish removers, basecoats and other manicuring products.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-BAC-001

DAA is an oxygenated solvent derived from acetone which has two alcohol and ketone functions. It has a high purity. It is colorless and odourless and has a low evaporation rate. Diacetone alcohol is mainly used in paints and coatings. It is a good solvent for organic peroxides.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SOL-DAA-001