Para Fine-Chem Industries

MetArmour DR1890 - Stainless Steel Descaler removes all kinds of scaling deposits inside SS pipelines, fixtures and other surfaces. Descaling is required where hard or salty water causes salt deposits and scales on the surface and inside pipelines. It also removes the dirt, grease, grim very effectively restoring the original surface. The high concentration cleaner can even remove tough scales, oxides, heat treatment deposits from stainless steel surfaces. It is economical to use and gives excellent results.It is non-corrosive to Stainless Steel and does not cause brittling.
Area of Use1. Stainless Steel pipelines in Food & Pharma industries2. Stainless steel fixtures in Hotels, Malls, Software parks3. Stainless Steel table tops, taps, sinks etc. in kitchens of homes, restaurants 4. Stainless Steel counter tops in Railway pantry car
Features / AdvantagesSafe and effective formulation to remove scales from Stainless steel surfacesFights off scales and salt depositsRestores the pipelines and fixtures to original condition
CoverageRoughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.
Suggested dilutionIt can be diluted with water 1:5-1:10 parts, depending on intensity of the scales
Usage instructionsFor removing scales from pipelines, prepare a bath of the solution with recommended dilution.Setup a circulation system that pumps the solution into the pipe and the outlet comes back to the bath solution. Run the circulation for 45 min to 1 hour, depending on the scale intensity. You will see the scale deposits returning to the bath.The process can be repeated with fresh bath for tough scales and thorough cleaning.Once the process is complete, flush the line with water
Safety PrecautionsHighly corrosive chemicalEnsure usage is in a vell ventilated area.Inhalation of high concentration of fumes can cause dizziness, nausea etc.Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-SSD-001
• Delivery Time: 5-7 Working Days

MetArmour DG1777 - AHU Fin Cleaner is an excellent alkaline foaming cleaner cum brightener for FCU's, AHU's, Evaporator Coils, Condenser Coils of Air-Conditioning units used widely by Engineering Industries, Software Parks, Hospitals, Pharmaceutical Industries, Hotels, Air conditioning contractors etc. The high foaming property ensures the product clings on to the dirt, oil, grim stuck on the coils and loosens them to remove them from the surface. A simple water-jet wash after some contact time leaves behind clean, bright looking FinsIt is highly effective for regular maintenance jobs and does not harm Aluminium fins, copper coils and any painted surfaces. 
Area of Use1. Cleaning of evaporator coils 2. Cleaning of AHU Aluminum fins3. Cleaning of condenser coils4. Used in Software parks, malls, hospitals etc.5. Removal of dirt, grim from the fins and evaporator coils
Features / AdvantagesNon-acidic, safe cleanerImproves energy efficiency of the air conditionerDoes not harm the aluminium fins or copper coilHigh power action on dirt and grim
CoverageRoughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the AHU fins
Suggested dilution1. For Heavy dirt coils 1:5 parts of water.2. For medium dirt coils 1:10 parts of water3. For normal cleaning of coils 1:20 parts with water.
Usage instructionsThe AHU Fin Cleaner is diluted with soft water as per the requirement. Ensure that the AHU is turned off and all electrical connections are removed.The prepared solution is then thoroughly sprayed on to the fins of the AHU.Allow sufficient contact time for loosening of the grim, scales etc. Then use high pressure water jet to clean off the liquid along with the dirt removed.Use sufficient water to ensure no chemical residue on the fins. The procedure can be repeated for tough stains and to ensure thorough cleaning.
Safety PrecautionsUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical.

Additional Information:

• Item Code: PF-SCH-AFC-001
• Delivery Time: 5-7 Working days

MetArmour DR1990 - Stainless Steel Pickling Gel is used to remove weld stains, black oxides caused due to the underlying chromium – depleted layer that occurs after welding of stainless steel. The gel also removes micro-slag particles and other contaminants that may cause local corrosion. The gel restores the stainless steel shiny finish and prevents further oxidation by passivating the surface. Being in gel form, it is very easy to apply on vertical surfaces too and reduces wastage.

 

Area of Use

1. Stainless Steel structure fabricators

2. Stainless Steel reactor manufacturers

3. Manufacturing industries requiring removal of weld marks

 

Features / Advantages

Strong gel formulation to remove weld stains

Suitable for all grades of Stainless Steel

Provides SS pickling and passivation to protect the surface

Does not emit harfmful fumes

Prevents further corrosion of the metal by passivating the surface

 

Coverage

Roughly 300 sq.ft per kg of gel when brushed on the required surface uniformly

 

Suggested dilution

Ready to use gel

 

Usage instructions

Apply the Stainless steel pickling gel on the surface of the part/component to be cleaned, using a brush of sponge.

Allow contact time of 10-15 minutes for the reaction to complete.

Wash with a jet of water to remove the chemical and the stain disappears. Dry with compressed air.

 

Safety Precautions

Highly corrosive chemical

Ensure usage is in a vell ventilated area.

Inhalation of high concentration of fumes can cause dizziness, nausea etc.

Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-PIS-001
• Delivery Time: 5-7 Working Days

MetArmour PS6343 - Eco-friendly Paint Stripper is a chemical solution that is designed to effectively remove paint, varnish, and other coatings from surfaces while being safe for the environment. This paint stripper is formulated with natural and biodegradable ingredients that do not contain harsh chemicals or solvents, like Caustic, Chlorinated solvents, Phenol, Formic Acid etc. It is a non-toxic and non-flammable product that is available in both liquid and gel forms, making it easy to use and apply. The stripper being alkaline in nature, is safe on all metals and non-metallic surfaces. The product has very low-VOC and hence can safely be used in enclosed spaces, without compromising on user safety. The stripper can be safely used even in household settings, owing to its extremely eco-friendly formulation.
AREA OF USEIn industries looking for a safe, eco-friendly paint stripper alternative to harmful solutionsIn industries involved in paint stripping in encolosed spacesTo remove tough paints and coatings without affecting the substrateTo remove tough paints and coatings without compromising on user safetyFor paint stripping from metals/non-metals in environmentally sensitive locations
Eco-friendly paint stripper is suitable for use in various industries, including: Construction and building industry Automotive industry Furniture industry Marine industry DIY and home improvement projects
FEATURES / ADVANTAGESEnvironmentally friendly: Eco-friendly paint stripper is safe for the environment and does not contain harsh chemicals or solvents. Safe for use: This paint stripper is non-toxic and non-flammable, making it safe for use in enclosed spaces. Easy to use: The liquid and gel forms of eco-friendly paint stripper make it easy to apply and remove. Effective: Despite being eco-friendly, this paint stripper is highly effective in removing multiple layers of paint and coatings. Suitable for various surfaces: Eco-friendly paint stripper can remove coatings from different surfaces, including wood, metal, and masonry.Free of: Caustic, chlorinated solvents, phenol, formic acid etc.
COVERAGERoughly 150 Sq.ft. Per kg of Eco-friendly Coating Stripper, when applied uniformly on the surface to be stripped off coating
SUGGESTED DILUTIONReady to use solutionUSAGE INSTRUCTIONSClean the component to remove any trace oils, grease or dirt.Mix the Eco-friendly paint stripper well and apply on the component in a thin uniform coating to cover the entire surfaceAllow dwell time of 20-30 minutesYou will see the coating bubbling out of the surface. This indicates the loosening of the coatingWash with water or wipe off the loosened paint before the solvent dries off
Alternatively, the component can be dipped into a bath prepared by pouring the paint stripper in a suitable HDPE/SS tank. Allow to be dipped for 20-30 minutes. Remove the component from the bath and wash with rinse water
SAFETY PRECAUTIONSUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical.

Additional Information:

• Item Code: PF-SCH-EPC-001
• Delivery Time: 5-7 Working Days

MetArmour DG1122 - Heavy Duty Degreaser is an alkaline cleaner having deep penetrating action, widely used in automotive industry to degrease engine parts.

It easily removes heavy soil, oil stain, grease etc. from most surfaces. The Cleaner is non-flammable & contains bio-degradable surfactants.

It is a safe and cost-effective replacement for hazardous solvent cleaners like Acetone, TCE, MDC etc.

The product can be used manually or in ultrasonic cleaning machines, floor mopping machines etc.

It is safe against most metals and has multipurpose use like floor cleaning, chimney cleaning etc.

 

Area of Use

1. Used as heavy duty degreaser in industries for component washing

2. Multipurpose use as floor cleaner in industries with heavy oil, grease spills etc.

3. Used in commercial kitchens to clean the hood, chimney etc.

 

Features / Advantages

Powerful alkaline cleaner

Pleasant odor

Highly cost effective

High foaming wash

Non-corrosive to metals

Safe alternate to hazardous solvent cleaners

 

Coverage

Roughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.

 

Suggested dilution

For heavy soil and dirt - 1:2 with water

For medium soil and dirt - 1:5 with water

For light soil and dirt - 1:10 with water

 

Usage instructions

The Heavy Duty Degreaser is diluted with soft water as per the requirement.

The prepared solution can then be used to clean the components by dipping or spray. It can also be used to mop the floor or can be used in floor cleaning machines.

For other surfaces, it can be used as a wipe or by dipping the item in the solution.

 

Safety Precautions

Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical.

Additional Information:

• Item Code: PF-SCH-HDD-001
• Delivery Time: 5-87 Days

MetArmour DG2233 - Eco-friendly Degreaser is a Bio-degradable, chemical-free liquid cleaning formulation for treatment of hydrocabons and oily/ greasy dirts. 

It works on bioremediation principle where the enzymes act on the hydrocarbons by breaking them down into carbon dioxide and water. It is a neutral pH, Non-hazardous & Non-toxic, safe product. The product is non-flammable and has no VOCs. 

It is a safe and cost-effective alternate to hazardous solvent cleaners like TCE, PCE, Acetone etc. 

It is very effective in cleaning metal and automobile parts by digesting oil, grease and dirt and also leaves a rust preventive coating on the base metal.
Area of Use1. Automotive industries for degreasing2. Components washing in manufacturing industries3. Multipurpose use - like floor cleaning, kitchen hood cleaning etc.4. Cleaning of aerospace components
Features / AdvantagesEco-friendly, safe and non-hazardous cleanerNeutral pH and pleasant smellingHigh power cleaning Cost-effective degreaserSafe against all metals including Aluminium, Magnesium etc.Has corrosion inhibiting propertiesReplacement for hazardous solvent cleaners
CoverageRoughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.
Suggested dilutionFor heavy soil and dirt - 1:5 with waterFor medium soil and dirt - 1:10 with waterFor light soil and dirt - 1:20 with water
Usage instructionsThe Eco Friendly Parts Cleaner is diluted with soft water as per the requirement.The prepared solution can then be used to clean the components by dipping or spray. It can also be used to mop the floor or can be used in floor cleaning machines. For other surfaces, it can be used as a wipe or by dipping the item in the solution.
Safety PrecautionsUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical.

Additional Information:

• Item Code: PF-SCH-EFD-001

ABS Plastic cleaner effectively removes any soils, oils and greasy contaminants from any plastic surfaces such as ABS, without affecting the base material. It removes all kinds of stains and leaves a dry matte finish. The product is based on a solvent blend and is quick drying in nature. It is ideal for cleaning work tables, car interiors, plastic chairs etc.
The solvent is mild in nature and does not cause any damage to the ABS surface, color or finish.



AREA OF USE

1. ABS Plastic manufacturers
2. Car interiors manufacturers
3. Car service centres
4. Plastic furniture manufacturers



FEATURES / ADVANTAGES

Safe for all plastic surfaces including ABS Plastic
Effective in removing all foreign particles and contaminants
Quick drying and leaves matte finish



COVERAGE
Roughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.

SUGGESTED DILUTION
Suggeste dilution:
Ready to use solution


USAGE INSTRUCTIONS
Apply the solvent on the areas to be cleaned by spraying it or applying by cloth. Allow few minutes of contact time and wipe it off with a dry cloth or allow to evaporate.

SAFETY PRECAUTIONS
Highly flammable solvent
Ensure usage is in a vell ventilated area.
Inhalation of high concentration of fumes can cause dizziness, nausea etc.
Keep away from heat and sparks
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-ABS-001

MetArmour DG3999 - Aquasol Degreaser is a powerful degreaser used to remove soils like dirt, grease, oils and other grime from any metallic or plastic surfaces. It has the unique properties of being solvent based, and being water dilutable. This USP makes the product desirable for most industries having to choose between Solvent or Aqua degreasers. The product can be used as it is, as a solvent degreaser. This gives it quick evaporation and instant cleaning in spray/wipe application. The same product can also be diluted with water, which forms a milky white emulsion that can be used in Spray/Dip or Ultrasonic cleaning of various components. The emulsion degreaser dissolves the oil, dirt and grime effectively without generating any foam. Being water dilutable, the product is highly cost-effective and benefits the user. Emulsion Degreaser has very low VOCs and thus safe for users and well under the exposure limits. Having a high flash point and being non-toxic, non-corrosive and cost effective, our Emulsion Degreaser is the go-to choice for all quick cleaning operations. 
AREA OF USEEmulsion degreasing and cleaning chemicals can be used manually in single-stage or multi-stage ultrasonic cleaning machines, soak cleaners and industrial hi-jet spray cleaning systems.Emulsion degreasing chemical is very versatile and covers a wide range of customer needs such as Low or No Foam High Jet Spray Cleaners (where foam is not desired) It is effective in the removal of a wide range of uncured adhesives. Residual contamination from tape, dust, dirt,grease, wax, and other process materials can be quickly and easily removed with prompt action. Emulsion Degreaser is effective in degreasing the electrical components on motors, transformers, and generators with care.
FEATURES / ADVANTAGESQuickly cuts through all types of grease and oil, leaving behind a squeaky clean finishIt is a 2-in-1 degreaser that can be used as a powerful solvent degreaser when used directly or an Aqua degreaser when diluted with waterRemoves many adhesives and light paint residues.Low-fire hazard, Low toxicity and Low VOC emissionsContains readily biodegradable ingredients.Safer alternative to ketones, benzene, chlorinated, aromatic and other aggressive solvent cleaners like Acetone, MDC, TCE Easy application with brush or low-pressure spray or dip.ontains no chlorinated, fluorinated, aromatic or ketone solvents, and no phosphates.Contains no ozone depleting chemicalsAggressive cleaning of organic contaminants while safe on substratesLow odor recognition in wipe, spray and regular usageLonger Bath Life (Change your cleaning/washing batch in your industrial washing machine less frequently)Works in ambient or room temperature to high temperature range.
COVERAGERoughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned
SUGGESTED DILUTIONReady to use solution as a Solvent DegreaserDilutable with soft water to work as an Aqua DegreaserDilution Recommendation - For heavy soil and dirt - 1:2 with waterFor medium soil and dirt - 1:5 with waterFor light soil and dirt - 1:10 with water
USAGE INSTRUCTIONSDirect use as a Solvent Degreaser - Take the components to be cleaned and with a cloth or sponge apply the solvent liberally. Allow contact time of few minutes and wipe off with a dry cloth. Alternatively, the component can be dipped in the solvent for few minutes and then cleaned off. The solvent can also be sprayed on the components for cleaning. Once cleaned, allow to dry before further use.
Diluted with water as an Emulsion Degreaser -Prepare the solution as per the recommended dilution ratioDip the components in the prepared bath and allow a contact time of 5-10 minutes. Agitation by means of air or ultrasonic is recommended for fast and thorough cleaning.The solution can also be heated upto 60C for powerful cleaning

Additional Information:

• Item Code: PF-SCH-AQD-001

MetArmour DG3434 - Solvent Degreaser is a powerful solvent used to remove soils like dirt, grease, oils and other grime from any metallic or plastic surfaces. Its quick evaporation characteristic and low smell makes it an ideal cleaning solution. Solvent Degreaser has very low VOCs and thus safe for users and we'll under the exposure limits. Having a high flash point and being non-toxic , non-corrosive and cost effective, our Solvent Degreaser is the go to choice for all quick cleaning operations. 

 

Area of Use

1.Solvent degreasing and cleaning chemicals can be used manually in single-stage or multi-stage ultrasonic cleaning machines, soak cleaners and industrial hi-jet spray cleaning systems.

2. Solvent degreasing chemical is very versatile and covers a wide range of customer needs such as Low or No Foam High Jet Spray Cleaners (where foam is not desired)

3.Longer Bath Life (Change your cleaning/washing batch in your industrial washing machine less frequently)

4.Works in ambient or room temperature to high temperature range.

 

Features / Advantages

1. Quickly cuts through all types of grease and oil, leaving behind a squeaky clean finish

2. Removes many adhesives and light paint residues.

 

3. Low-fire hazard, Low toxicity and Low VOC emissions

4.Contains readily biodegradable ingredients.

5.Safer alternative to ketones, benzene, chlorinated, aromatic and other aggressive solvent cleaners like Acetone, MDC, TCE

6. Easy application with brush or low-pressure spray or dip.

7.Contains no chlorinated, fluorinated, aromatic or ketone solvents, and no phosphates.

Features

1. Contains no ozone depleting chemicals

2. High purity blend with low residues <50ppm NVR

3. Aggressive cleaning of organic contaminants while safe on substrates

4.Low odor recognition in wipe, spray and regular usage

5. Having low flammable hazard, it is normally used as a general purpose spray and wipe solvent cleaner and degreaser for surface preparation on a variety of aircraft surfaces and components.

6.It is effective in the removal of a wide range of uncured adhesives. Residual contamination from tape, dust, dirt,grease, wax, and other process materials can be quickly and easily removed with prompt action.

7.Solvent Degreaser is effective in degreasing the electrical components on motors, transformers, and generators with care.

8.Solvent Degreaser is normally used as a general purpose spray and wipe solvent cleaner and degreaser for surface preparation of variety of metals used in machining Industries.

 

Coverage

Roughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned

 

Suggested dilution

Ready to use solution

 

Usage instructions

Take the components to be cleaned and with a cloth or sponge apply the solvent liberally. Allow contact time of few minutes and wipe off with a dry cloth.

Alternatively, the component can be dipped in the solvent for few minutes and then cleaned off. The solvent can also be sprayed on the components for cleaning.

Once cleaned, allow to dry before further use.

 

Safety Precautions

Flammable solvent

Ensure usage is in a vell ventilated area.

Inhalation of high concentration of fumes can cause dizziness, nausea etc.

Keep away from heat and sparks

Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-SDG-001

Industrial Floor cleaner is a highly effective, versatile cleaner and degreaser. It offers businesses a range of workplace benefits when compared to harsh chemical based floor cleaners, like being safe and having a pleasant odour. It has better cleaning and protection than standard phenyls. The Floor cleaner is safe to use on variety of surfaces like Epoxy, Tiles, PU Flooring etc. to clean dust, dirt and grim.



AREA OF USE

1. Floor Cleaner in industries with Epoxy or PU Flooring
2. Floor Cleaner in shopping malls, super markets with heavy footfall
3. Floor Cleaner in offices, MNCs etc.



FEATURES / ADVANTAGES

Tough in cleaning dirt, oil, grease, grim etc.
Safe & pleasant odor
Bio-degradable ingredients



COVERAGE
Roughly 1000 sq.ft per litre of prepared solution, when mopped with a quality mop or machine scrubber

SUGGESTED DILUTION
Suggested dilution:
1. For Heavy dirt - 1:3 parts of water.
2. For medium dirt use- 1:10 parts of water
3. For normal cleaning use- 1:15 parts with water.


USAGE INSTRUCTIONS
Prepare the solution in the desired ratio and mix well. Wipe the floor to be cleaned with a clean mop or a scrubbing machine. Allow few minutes of contact time and wipe it off with a dry cloth or scrubber.
Repeat cleaning for tough greasy stains

SAFETY PRECAUTIONS
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical.
The cleaned floor might be slippery until completely dried.

Additional Information:

• Item Code: PF-SCH-FCL-001
• Delivery Time: 4-5 Working Days

This glass cleaner removes dirt, grease, grim very effectively without leaving any stain behind. The high concentration cleaner can even remove tough scales and deposits from glass. It is economical to use and gives excellent results.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-GDL-001

MetArmour DG3545 - Resin Cleaner is a formulated alkaline blend of surfactants, having high penetration power designed to remove resin stains, adhesive and glue marks from various substrates. It can remove the paint resins and other resins, extracts remnants & stains from the insides of tankers, barrels, drums and other storage containers.It can also remove dust, dirt, oily substances from the surface. It is non-corrosive to most metal surfaces and will not harm painted surfaces. It has no VOC content and is non-flammableIt can be used with cleaning machines or through manual scrubbing.
Area of Use1. To clean resin from storage containers2. To remove adhesive and glue spills from any surface3. Can be used as cleaner to remove oil, grease etc.
Features / AdvantagesStrong penetrating surfactantsRemoves tough resin stainsNo VOC contentPleasant odorNon-corrosive to metals
CoverageRoughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.
Suggested dilutionCan be diluted upto 1:5 parts with water or used directly, depending on the toughness of the stains
Usage instructionsThe Resin Cleaner is diluted with soft water as per the requirement.The prepared solution can then be sprayed on the surface with adhesive, resin or glue remains. Allow sufficient contact time for the loosening of the residue. Then wipe off with scrubber or cloth.For light surface residue, it can be used as a wipe or by dipping the item in the solution for a few minutes
Safety PrecautionsKeep away from heat and sparks.Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-RCL-001
• Delivery Time: 5-7 Working Days

SiliChem EL6575 - Antistatic Floor Cleaner is a specially formulated cleaner for use on any type of ESD flooring or static control floor coating, to ensure effective cleaning without leaving any ionic residues. It is safe to use on ESD Epoxy, Vinyl & Paints. ESD Aprons and slippers can also be washed using the cleaner.

Regular cleaners and detergent compounds leave harmful ionic residues after cleaning, thereby reducing the static-control properties. Our product removes dirt and soil while maintaining the conductivity of critical ESD flooring substrate.

Additional Information:

• Item Code: PF-SCH-ASF-001
• Delivery Time: 5-7 Working Days

Granite polishing cleaner contains abrasives and chemicals that react with the granite surface to create a deep shine and bring out the natural color and beauty. It can even remove rust stains and scratches developed from long storage time.

Additional Information:

• Item Code: PF-MGP-01

Any glass surface tends to attract dirt, water spots, scales and other droppings. Para Fine - Glass Cleaner is a solvent based formulation that instantly removes dirt, grease, oil, stains and droppings from the glass surface, leaving behind a shiny, streak-free, clear finish.
The cleaner is safe to use and has a pleasant odor. It can be used across glass and shiny surfaces, such as tabletops, mirrors, glass windows, cabinets, furniture, car windows etc.



AREA OF USE

1. Clean glass partitions in offices, malls, hotels etc.
2. Clean car windows and windshield to remove droppings and dirt
3. Clean tabletops, mirrors, cabinets, furniture etc. in offices
4. Clean mirrors, glass partitions in toilets and bath areas



FEATURES / ADVANTAGES
Features
Instant clean with no residue
Streak-free, shiny glass and mirrors
Quick drying
Pleasant odor
Safe to use on variety of surfaces



COVERAGE
Roughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned

SUGGESTED DILUTION
Suggested dilution:
1. For Heavy dirt - 1:10 parts of water.
2. For medium dirt use- 1:20 parts of water
3. For normal cleaning use- 1:50 parts with water.


USAGE INSTRUCTIONS
Prepare the solution in the desired ratio and mix well. Spray the solution liberally on the glass to be cleaned. Allow few minutes of contact time and wipe it off with a dry microfiber cloth.
Repeat cleaning for tough greasy stains

SAFETY PRECAUTIONS
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-GCL-001
• Delivery Time: 5-7 Working Days

Para Fine Concrete Remover is a fast-acting, non-fuming concrete remover for dissolving lime, concrete, mortar residues, POP stains etc. from concrete mixers, trucks, trowels used in laying and transporting concrete. It can also be used on surfaces like granite, stonework that have been splashed with concrete. Concrete Remover quickly loosens the concrete droppings without damaging the metal or floor surface.
It can also be safely used on painted surfaces

AREA OF USE

1. Construction equipment handling concrete
2. Finishing of buildings or apartments to remove concrete spills of the floor
3. To remove concrete splashes from any flooring or metal surface
4. To remove POP stains from granite flooring
5. To remove any other superficial stains from floors/walls etc.

FEATURES / ADVANTAGES
1.Fast-acting concrete dissolver
2.Non-fuming
3.Safe on flooring
4.Safe on metals
5.Can be used on painted surfaces

COVERAGE
Roughly 300 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned

SUGGESTED DILUTION
Suggested dilution
Direct use for heavy deposits
1:1 dilution with water for medium deposits
1:3 dilution with water for light deposits


USAGE INSTRUCTIONS
Prepare the solution in the desired ratio and mix well. Spray the solution liberally on the surface to be cleaned. Allow few minutes of contact time and wipe it off with a scrubber or pressure wash.

SAFETY PRECAUTIONS
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-CON--001

Marble cleaner is special formulation for regular maintenance. It gives floor an extra fine polishing effect and ensures no scratch causing particles are left behind before buffing. A pH balance formulation retains high gloss on marble.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-MCL-001

Para Fine Anti Spatter Fluid is used to prevent the adhesion of weld spatter on the steel fixture during any welding operation. The fluid creates a low surface tension layer on the metal and ensures the spatter generated during welding flows off easily without sticking to the surface. This saves a lot of manual labor employed to chip off unwanted spatter and ensures the finish of the welded article isn't spoiled.
It is predominantly used in CO2, MIG and TIG welding. The Anti Spatter also ensures no spatter formation on the welding tip, thus improving the life of the tip and electrodes.
The formulation is completely biodegradable and free of silicone, thus safe to use and leaves behind no residue on the surface of the metal, that would affect further processes like painting, plating etc.
Being a water based formulation, it also removes the risk of any accidental fires while using solvent based or aerosol anti-spatter fluids.

AREA OF USE


1. To prevent spatter formation during Stainless Steel fabrication
2. To avoid spatter deposits on MS fabrication jobs
3. To protect the welding tip and electrode from spatter deposits
4. Use where further process like painting, plating etc.
5. To remove fire hazards in shopfloor

FEATURES / ADVANTAGES

No spatter or residue on the job after welding
Weld tip remains functional for long time
Biodegradable, no-smoke
Silicone free
Suitable for most types of welding



COVERAGE
Roughly 500 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned

SUGGESTED DILUTION
Suggested dilution:
Ready to use solution
USAGE INSTRUCTIONS
Spray the solution on the workpiece where welding is to be done. Ensure uniform spreading, else the solution can be wiped on the piece with a sponge. Start the welding after solution is spread well. Wipe off the loosely held spatter on the surface with a brush. Proceed to the next workpiece in a similar way.

SAFETY PRECAUTIONS
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-ASL-001

Granite polishing cleaner contains abrasives and chemicals that react with the granite surface to create a deep shine and bring out the natural color and beauty. It can even remove rust stains and scratches developed from long storage time.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-GRC-001

ADHESIVE CLEANER is a blend of solvents having powerful penetrating properties designed to remove cured adhesives, glues and their residues from any surface like glass, metal, plastic, flooring etc.
The Adhesive Cleaner works by penetrating into the adhesive, breaking the bonds and releasing the adhesive from it's base.
It can be used to remove posters, stickers, chewing gum, adhesive residues etc.
It can safely be used on any surface and does not affect the material or paint



AREA OF USE
Areas of Use:
1. Removal of excess glue during wooden furniture lamination
2. Removal of spilt adhesive in Manufacturing industries or for rework of components
3. Removal of stickers/posters from Glass/ Walls in public places
4. Removal of chewing gum, posters in trains, buses, metro etc.
4. Removal of stickers pasted in Elevators in buildings etc.
5. Removal of cured conformal coatings on PCBs



FEATURES / ADVANTAGES

High penetrating power and deep cleaning
Doesn't leave any residue
Pleasant odour
Does not harm the paint of the base surface
Low VOC and environmentally sensitive
Works with all types of cleaning equipment

COVERAGE
Roughly 500 sq.ft. per litre, if applied by sponge or brush on a smooth, non-absorptive surface.

SUGGESTED DILUTION
Suggested Dilution:
Ready to use solution
USAGE INSTRUCTIONS
The Adhesive Cleaner can be sprayed on the surface to be cleaned off of glue, adhesives, chewing gum, stickers/posters etc. The solvent penetrates through the adhesive residue and releases it from the surface.
The surface can then be cleaned with a dry cloth to remove the residues. Repeat the process for tough stains.
Alternatively, the component (if small) can be dipped into the Adhesive cleaner for thorough cleaning.

SAFETY PRECAUTIONS
Highly flammable solvent
Ensure usage is in a vell ventilated area.
Inhalation of high concentration of solvent vapour can cause dizziness, nausea etc.
Keep away from heat and sparks
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-PAC-001
• Delivery Time: 5-7 Working days

MetArmour DR2789 - Metal Brightner effectively removes tarnish, dullness and heat-burns from metal surfaces. Its dual-chemical and abrasive action restores metal's natural appearance and lustre without damaging the metal. Metal surface cleaning agents comprises mainly aqueous solution with specialty blended chemicals to remove the oxidation on the metal.
Metals that can be cleaned:1. Stainless steel, Mild Steel2. Iron surface, GI Surface3. Copper4. Aluminium5. Brass6. Silver, Gold etc.
Area of Use1. Metal restoration services2. Manufacturing industries3. Electrical industries - to remove oxidation from copper bus bar and cables4. Gold and silver industries - to remove tarnish and black oxidation stains5. Temple restoration contractors
Features / AdvantagesEffective & safe formulation to restore metals to original conditionRemoves oxidation, tarnish thoroughlyLeaves a passive surface to temporarily protect the metal from further oxidation
CoverageRoughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.
Suggested dilutionIt can be diluted with water upto 1:3 parts, depending on the intensity of tarnish
Usage instructionsPrepare the solution in the desired ratio and apply it on the tarnished metal by spray or dip. Allow few minutes of contact time and wipe it off with a cloth or scrubber. Wash with water and dry to remove any residues.
Safety PrecautionsUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-MBR-001
• Delivery Time: 5-7 Working Days

MetArmour DG9922 - Adhesive Cleaner is a blend of solvents having powerful penetrating properties designed to remove cured adhesives, glues and their residues from any surface like glass, metal, plastic, flooring etc.

The Adhesive Cleaner works by penetrating into the adhesive, breaking the bonds and releasing the adhesive from it's base.

It can be used to remove posters, stickers, chewing gum, adhesive residues etc.

It can safely be used on any surface and does not affect the material or paint

 

Area of Use

1. Removal of excess glue during wooden furniture lamination

2. Removal of spilt adhesive in Manufacturing industries or for rework of components

3. Removal of stickers/posters from Glass/ Walls in public places

4. Removal of chewing gum, posters in trains, buses, metro etc.

4. Removal of stickers pasted in Elevators in buildings etc.

5. Removal of cured conformal coatings on PCBs

 

Features / Advantages

High penetrating power and deep cleaning

Doesn't leave any residue

Pleasant odor

Does not harm the paint of the base surface

Low VOC and environmentally sensitive

Works with all types of cleaning equipment

 

Coverage

Roughly 500 sq.ft. per litre, if applied by sponge or brush on a smooth, non-absorptive surface.

 

Suggested dilution

Ready to use solution

 

Usage instructions

The Adhesive Cleaner can be sprayed on the surface to be cleaned off of glue, adhesives, chewing gum, stickers/posters etc. The solvent penetrates through the adhesive residue and releases it from the surface.

The surface can then be cleaned with a dry cloth to remove the residues. Repeat the process for tough stains.

Alternatively, the component (if small) can be dipped into the Adhesive cleaner for thorough cleaning.

 

Safety Precautions

Highly flammable solvent

Ensure usage is in a vell ventilated area.

Inhalation of high concentration of solvent vapor can cause dizziness, nausea etc.

Keep away from heat and sparks

Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-ADC-001
• Delivery Time: 5-7 Working Days

We provide a spray type deodoriser that can be applied in effluent treatment, to completely nullify the bad odors of effluent. This creates a pleasant work environment and removes harmful smells.


**Prices are subject to fluctuations based on market trends. Send us an enquiry for the latest prices

Additional Information:

• Item Code: PF-SCH-DOD-001

MetArmour DR3900 - Green Acid Cleaner is an eco-friendly acidic cleaner. It is a special blend of safe, non-corrosive, organic and green acids that are far less harmful to the users and the environment. The cleaner has no odour, fumes or any irritation to users. There is no compromise in the cleaning effectiveness and it performs as good as the mineral acids, due to the proprietary additives used. It can typically be used to clean surfaces that require stain removal, scale removal, rust/corrosion removal and for various other applications. The product is non-oxidizing in nature unlike Nitric Acid, Sulfuric acid. It forms water-soluble salts with inorganic metal ions that helps in reducing salt deposits or scale redeposition after cleaningIt can replace the function of hazardous acids in all typical applications by making the usage safe and much more effective.
AREA OF USETo remove scales from pipesTo remove stains from ceramics, tiles and other surfacesFor use in electroplating of tinTo remove rust and corrosion from metalsTo remove oxides from Aluminium and other alloysTo eliminate use of hazardous mineral acidsTo reduce exposure of acids to users
FEATURES / ADVANTAGESNot harmful to the marine environment.Cleaning after ores, cement, lime- stone/sand, removal of rust, brightening of metals in cargo holds.Cleans ferrous metal surfaces.Removes light rust and rust stains and inhibits corrosionSurface brighteningPrevents flash rust and inhibits corrosionRemoves rust stains from painted, ceramic and wooden surfaces.Easy to useSafe for the metal and has no toxic or harsh fumesSafe for users and environment
COVERAGERoughly 400 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned
SUGGESTED DILUTIONDirect use for heavy rust1:1 dilution with water for medium rust1:3 dilution with water for light rust

USAGE INSTRUCTIONSPrepare the solution as per the recommended dilution ratioTake the components to be cleaned and with a cloth or sponge apply the Green Acid Cleaner liberally. Allow contact time of 5-10 minutes and wipe off with a dry cloth. Alternatively, the component to be cleaned can be dipped in the prepared solution for few minutes and then rinsed off with soft water. The prepared solution can also be sprayed on the components for cleaning. Once cleaned, rinse with soft water and dry with compressed air. 
SAFETY PRECAUTIONSUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-GAC-001

MetArmour DG1565 - Kitchen Exhaust Cleaner is a blend of surfactants and detergent molecules having high cutting power designed to clean the built up oil, grease, dirt and other grim on kitchen exhaust hoods. This can also remove grease, carbon and sticky stains from the work table, floors, chimneys etc.

Having no flash point, it is safe for hot environments and naked flames. It is non-corrosive to most metals and will not harm paint surfaces.

Being dilutable with water, it is highly cost effective. The non-hazardous & non-toxic nature of the product make it safe for use in kitchen areas.

 

Area of Use

1. Kitchens of 5-star hotels, restaurants, marriage halls etc.

2. Pantry kitchen in Railway coaches

 

Features / Advantages

High cleaning power to dissolve thick oil stains

Non-hazardous to use in kitchens

Cost-effective & Safe

Non-corrosive to metals

Pleasant odor

 

Coverage

Roughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned

 

Suggested dilution

1. For Heavy dirt - 1:1 parts of water.

2. For medium dirt use- 1:5 parts of water

3. For normal cleaning use- 1:10 parts with water.

 

Usage instructions

Prepare the solution as per the recommended dilution with soft water.

Spray the prepared solution on the surfaces to be cleaned. Allow sufficient contact time for the chemical to loosen the tough grease, oil etc.

Spray water to remove the residues and wipe clean.

The solution can be heated upto 60C for more effective and faster cleaning.

Repeat the procedure for tough stains and thorough cleaning.

 

Safety Precautions

Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical.

Additional Information:

• Item Code: PF-SCH-EXC-001
• Delivery Time: 5-7 Working Days

Printing plate cleaner is a solvent based cleaner, which is powerful in cleaning the printing plate, steel rollers etc. used in printing. It effectively removes the old ink/colors thoroughly to ensure no contamination when there is a change of ink. It dries quickly and leaves a dry matte finish after cleaning, making it readily usable for next line of production.
It is a safe cleaner and non-corrosive to metal surfaces and does not harm painted surfaces.



AREA OF USE

1. Newspaper printing industries
2. Label printing industries



FEATURES / ADVANTAGES

Solvent blend with high Kb value
Effective cleaner
Quick drying
Low VOC content



COVERAGE
Roughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned

SUGGESTED DILUTION
Suggested dilution:
Ready to use solution


USAGE INSTRUCTIONS
Remove the plate to be cleaned and with a cloth, apply the solvent liberally and clean the plate with rubbing action.
Alternatively, the plate can be dipped in the solvent for few minutes and then cleaned off.
Once cleaned, allow to dry before further use.

SAFETY PRECAUTIONS
Highly flammable solvent
Ensure usage is in a vell ventilated area.
Inhalation of high concentration of fumes can cause dizziness, nausea etc.
Keep away from heat and sparks
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-PPC-001
• Delivery Time: 5-7 Working Days

A unique formulation developed to eliminate the foul rotten egg smell of H2S gas emanating in operations where Sulphur is involved. 

By reacting with the H2S gases evolved, it neutralizes the gas to elemental sulphur and thus eliminates the foul smell completely, as well as the associated hazards from inhaling the gas. 

The Scavenger dosage is very low to the system (less than 1%) and has very high effectiveness. 

It can commonly be used in Petrochemical industries, Abrasive manufacturers, Rubber industries etc.

MetArmour DG8877 - ABS Plastic Cleaner effectively removes any soils, oils and greasy contaminants from any plastic surfaces such as ABS, without affecting the base material. It removes all kinds of stains and leaves a dry matte finish. The product is based on a solvent blend and is quick drying in nature. It is ideal for cleaning work tables, car interiors, plastic chairs etc.

The solvent is mild in nature and does not cause any damage to the ABS surface, color or finish.

 

Area of Use

1. ABS Plastic manufacturers

2. Car interiors manufacturers

3. Car service centers

4. Plastic furniture manufacturers

 

Features / Advantages

Safe for all plastic surfaces including ABS Plastic

Effective in removing all foreign particles and contaminants

Quick drying and leaves matte finish

 

Coverage

Roughly 500 sq.ft. per litre of prepared solution, if applied by sponge or brush on a smooth, non-absorptive surface.

 

Suggested dilution

Ready to use solution

 

Usage instructions

Apply the solvent on the areas to be cleaned by spraying it or applying by cloth. Allow few minutes of contact time and wipe it off with a dry cloth or allow to evaporate.

 

Safety Precautions

Highly flammable solvent

Ensure usage is in a vell ventilated area.

Inhalation of high concentration of fumes can cause dizziness, nausea etc.

Keep away from heat and sparks

Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical

SiliChem PCB Cleaner is an effective Eco-friendly cleaning solvent to clean, degrease and remove organic contaminants like Solder Residue / Flux residue from PCBs. This product is an Eco-friendly, Non- Hazardous, Non-toxic, Bio-degradable, user friendly and a safe substitute for hazardous solvents like TCE, PCE and AlkalisThe product is based on a citrus compound and is water soluble. It is completely bio-degradable and safe to the users, unlike carcinogenic solvents like TCE.It can easily remove any kind of foreign contaminants from the PCBs
Area of Use1. Used in electronic industries to clean PCBs from solder residue, flux etc.2. Industries looking for safe alternate to TCE
Features / AdvantagesEco-friendly and biodegradableSafe alternate to chlorinated solventsEffective cleaner for PCBsCan be used in Ultrasonic cleaning machine with heating
CoverageDepends on type of PCB, contamination levels etc.
Suggested dilution70% PCB Cleaner30% Isopropyl Alcohol, for effective cleaning  of PCBs
Usage instructionsPrepare the solution as per the recommended dilution. Make a bath with the prepared solution and dip the PCBs to be cleaned in this bath. Ultrasonic and heat can be provided for thorough spotless cleaning.Once cleaned, remove the PCBs from the liquid and dry.
Safety PrecautionsUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical.The chemical becomes flammable in nature after mixing with IPA. Ensure to keep away from heat and sparks.

Additional Information:

• Item Code: PF-SCH-PCB-001
• Delivery Time: 3-4 Working days

STENCIL CLEANER is an Alcohol based cleaner designed to clean the stencils of printed circuit board to remove the traces of silver paste and other metallic pastes and flux. This product can also used to clean any surface to remove fine dust particles. It leaves no ionic residues and dries quickly.It is a safe cleaner and non-corrosive to metal surfaces and does not harm painted surfaces.
Area of Use1. PCB Board Manufacturers2. Electronic industry3. Electronics repair and rework
Features / AdvantagesPowerful cleaning to remove all tracesLeaves clean, matte finish after the processFast dryingLow VOC contentNo offensive smell or irritation from the solvent
CoverageRoughly 600 sq.ft. per litre of prepared solution, if sprayed uniformly on the areas to be cleaned
Suggested dilutionReady to use solution
Usage instructionsRemove the stencil to be cleaned and with a cloth, apply the solvent liberally and clean the plate with rubbing action. Alternatively, the stencil can be dipped in the solvent for few minutes and then cleaned off.Once cleaned, allow to dry before further use.
Safety PrecautionsHighly flammable solventEnsure usage is in a vell ventilated area.Inhalation of high concentration of fumes can cause dizziness, nausea etc.Keep away from heat and sparksUse PPEs like gloves, apron, eye goggles and face shield while handling the chemical

Additional Information:

• Item Code: PF-SCH-STC-001
• Delivery Time: 5-7 Working Days