Peenya, Bengaluru, Karnataka
GST No. 29AAYFP2296D1ZL
Call 08048963171 87% Response Rate
Country of Origin | Made in India |
MetArmour PC1600 - Heat Resistant Aluminium Coating 600C is a high performance, heat resistant aluminium based coating that imparts excellent heat resistance to the base metal upto 600C. It is a direct to metal coating, that can be applied on bare metal with minimal surface preparation. The coating has excellent adhesion properties to metal and provides protection from environmental and corrosive elements. It is suitable for use on domestic stoves, furnace chimneys, boiler outer surfaces, industrial ovens, kitchen exhausts and a wide variety of surfaces exposed to heat. Coatings done in indoor conditions have a coating life of upto 3 years and outdoor conditions over 1 year (depends on environmental factors, coating methods etc.)
The HR Aluminium coating imparts a bright, semi-matte, impressive silver color that also improves the aesthetics of the equipment/machines that are coated.
AREA OF USE
Industrial chimneys
Kitchen exhausts
AHU coils
Heat exchanger coils
Solar water heater tanks
Industrial ovens
Furnace coverings
Industrial process tanks
FEATURES / ADVANTAGES
Direct to metal application
Minimal surface preparation
No primer required
Excellent adhesion to metal
Superior heat resistance upto 600C
Offers basic corrosion resistance
Protects from environmental elements
Durable coating life
Imparts brilliant appearance
Easy application through brush, roller or spray
High Dry Film Thickness per coat
COVERAGE
Roughly 200 sq.ft. per litre per coat of prepared coating when applied on smooth, non-porous surfaces
SUGGESTED DILUTION
The coating can be diluted with upto 20% of thinner, for reducing viscosity for spray applications
Special stoving thinner can be provided on request
USAGE INSTRUCTIONS
Prepare the metal surface to be coated by removing rust, oil, grease and other foreign matter
Use our Para Fine Rust Remover for easy removal of rust
Wash and dry with water
Prepare the Heat Resistant Aluminium Coating with required amount of thinner and mix uniformly
Apply on the surface using a brush, roller or airless spray
Allow the first coat to dry for 15 minutes
Apply a second coat on the surface in the same way
Allow the second coat to dry for atleast 6 hours
Ensure to apply the coating in shade, away from direct sunlight
SAFETY PRECAUTIONS
Flammable in nature. Keep away from sparks, heat sources.
Ensure usage is in a vell ventilated area.
Inhalation of high concentration of fumes can cause dizziness, nausea etc.
Use PPEs like gloves, apron, eye goggles and face shield while handling the chemical
View Complete details